SIIG, Inc - SC-SATM12

SC-SATM12 by SIIG, Inc

Image shown is a representation only.

Manufacturer	SIIG, Inc
Manufacturer's Part Number	SC-SATM12
Description	SIIG; Product Type: SATA Controller; Host Interface: PCI; Form Factor: Plug-in Card; Controller Type: Serial ATA; Number of SATA Ports (Internal): 2;

SC-SATM12 Technical Details

NAME	DESCRIPTION
Data Transfer Rate:	150 MB/s
Number of Physical Drive Supported:	2
Certifications & Standards:	FCC Class B (DoC) CE
Product Name:	High-speed dual-channel PCI-to-Serial ATA Host Adapter
Controller Type:	Serial ATA
Limited Warranty:	5 Year
Brand Name:	SIIG
Number of SATA Ports (Internal):	2
Form Factor:	Plug-in Card
Package Contents:	1 x High-speed dual-channel PCI-to-Serial ATA Host Adapter 1 x Serial ATA cable 1 x SATA 15-pin power cable 1 x Quick Installation Guide
Additional Information:	The thin, flexible Serial ATA cable is easier to route inside a PC Features Watch Dog timer for fault resiliency Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future Co-exists with onboard controller Can be used as the boot controller when a bootable hard disk drive is attached Features independent 256-byte FIFOs per channel for host reads and writes
Marketing Information:	The Serial ATA PCI-M is an ultra high-speed dual channel Serial ATA controller for use in Mac computers. It achieves burst data transfer rates up to 150MB/s (1.5Gbps) and supports various brand of hard disk drives with capacities greater than 137GB.
Product Type:	SATA Controller
Host Interface:	PCI
System Requirements:	G3 (Blue & White) or later Available PCI slot
Total Number of SATA Ports:	2
Compatibility:	Compliant with Serial ATA Specification, revision 1.0

Popular Products

1554216004

Molex

WIRE AND CABLE;

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

1N4148

Semitronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

2N7002

Calogic

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;