Image shown is a representation only.
| Manufacturer | Standard Microsystems |
|---|---|
| Manufacturer's Part Number | COM20020P |
| Description | SERIAL IO/COMMUNICATION CONTROLLER, LAN; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; |
| Datasheet | COM20020P Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Minimum Supply Voltage: | 4.5 V |
| Package Body Material: | PLASTIC/EPOXY |
| Nominal Supply Voltage: | 5 V |
| Maximum Seated Height: | 3.81 mm |
| Sub-Category: | Serial IO/Communication Controllers |
| Surface Mount: | NO |
| Maximum Supply Current: | 50 mA |
| Terminal Finish: | TIN LEAD |
| Data Encoding or Decoding Method: | NRZ |
| On Chip Data RAM Width: | 8 |
| No. of Terminals: | 24 |
| No. of Serial I/Os: | 1 |
| Terminal Position: | DUAL |
| Package Style (Meter): | IN-LINE |
| No. of DMA Channels: | 0 |
| No. of I/O Lines: | 0 |
| Address Bus Width: | 3 |
| Maximum Data Transfer Rate: | .625 MBps |
| Technology: | CMOS |
| RAM Words: | 1024 |
| JESD-30 Code: | R-PDIP-T24 |
| Maximum Clock Frequency: | 40 MHz |
| Package Shape: | RECTANGULAR |
| Terminal Form: | THROUGH-HOLE |
| Maximum Operating Temperature: | 70 Cel |
| Package Code: | DIP |
| Width: | 15.24 mm |
| Peripheral IC Type: | SERIAL IO/COMMUNICATION CONTROLLER, LAN |
| Maximum Supply Voltage: | 5.5 V |
| Low Power Mode: | NO |
| Boundary Scan: | NO |
| External Data Bus Width: | 8 |
| JESD-609 Code: | e0 |
| Minimum Operating Temperature: | 0 Cel |
| Qualification: | Not Qualified |
| Package Equivalence Code: | DIP24,.6 |
| Length: | 31.877 mm |
| Peak Reflow Temperature (C): | 235 |
| Bus Compatibility: | 8051; 6801 |
| Terminal Pitch: | 2.54 mm |
| Temperature Grade: | COMMERCIAL |
| Power Supplies (V): | 5 |
