StarTech.com - PCIIDE100R

PCIIDE100R by StarTech.com

Image shown is a representation only.

Manufacturer	StarTech.com
Manufacturer's Part Number	PCIIDE100R
Description	StarTech.com; Product Type: Ultra ATA Controller; Host Interface: PCI; Form Factor: Plug-in Card; Controller Type: Ultra ATA/100 (ATA-6); Certifications & Standards: FCC;

PCIIDE100R Technical Details

NAME	DESCRIPTION
Data Transfer Rate:	100 MB/s
Certifications & Standards:	Safety Standard North America: FCC CSA Safety Standards Europe: CE TUV Safety Standards International: CB UL
Product Name:	2 Port PCI ATA/100 IDE Controller Card
Controller Type:	Ultra ATA/100 (ATA-6)
Limited Warranty:	2 Year
Brand Name:	StarTech.com
RAID Supported:	Yes
Form Factor:	Plug-in Card
Package Contents:	2-port Ultra ATA/100 PCI RAID Adapter 1 x Driver Disk 1 x 80 conductor Ultra ATA/100 IDE cable
Additional Information:	Can replace the on-board IDE ports on a PC or work in addition to them Supports Ultra and Multi-Word DMA timing modes and CRC protection/verification On-board BIOS provides a menu driven interface for configuring the RAID volumes Saves money by using IDE drives instead of SCSI for RAID applications in workstations and servers Increases the speed of a PC or server if configured with RAID 0 (striping) Improves the fault tolerance of data if configured with RAID 1 (mirroring) Increases both speed and fault tolerance if configured with RAID 0+1 (mirroring a striped set) Standards: ATAPI ATA/33 Ultra ATA/66 UDMA/66 Ultra ATA/100 UDMA/100
Marketing Information:	The StarTech.com PCI Ultra ATA/100 IDE RAID Controller Card provides an inexpensive way for users to increase the speed or fault-tolerance of their PC. RAID levels 0 (striping), 1 (mirroring) and 0+1 (mirroring a stripe set) are supported on up to 4 IDE drives. The card supports Ultra ATA/100 hard drives for maximum performance, but is also compatible with older drives. This card is the perfect solution for adding the redundancy of mirroring to small business file servers, or improving the drive speed on workstations with striping.
Product Type:	Ultra ATA Controller
Host Interface:	PCI
Maximum Data Transfer Rate:	100
System Requirements:	An IBM PC or Server An open PCI slot
Height:	3.14 "
Compatibility:	Plug and Play Windows XP ATAPI devices CD-ROM DVD-ROM CD-R CD-RW LS-120 Tape Drives Zip Drives
RAID Levels:	0, 1, 0+1
Width:	4.72 "

Popular Products

1N4148

New Jersey Semiconductor Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

L7805CV

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;

BSS123-7-F

Diodes Incorporated

BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.

1N4148

Capar Components

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;

BAV99

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.