PCISATA4R1 by StarTech.com

Image shown is a representation only.

Manufacturer StarTech.com
Manufacturer's Part Number PCISATA4R1
Description StarTech.com; Product Model: PCISATA4R1; Product Type: SATA Controller; Host Interface: PCI; Form Factor: Plug-in Card; Product Name: 4 Port PCI SATA RAID Controller Adapter Card;
NAME DESCRIPTION
Data Transfer Rate: 150 MB/s
Number of Physical Drive Supported: 4
Environmental Certification: RoHS
Environmentally Friendly: Yes
Product Name: 4 Port PCI SATA RAID Controller Adapter Card
Platform Supported: PC
Limited Warranty: Lifetime
Brand Name: StarTech.com
RAID Supported: Yes
Number of SATA Ports (Internal): 4
Form Factor: Plug-in Card
Additional Information:
  • FIFO: 256 Bytes per channel
  • Includes features like Serial ATA to PCI interrupt masking and Watch Dog Timer for fault resiliency
  • Universal IO bracket easily fits any low profile or full-sized system
  • Works as a non-RAID controller card when the system BIOS is not RAID configured
  • Add 4 SATA ports to a full or low profile/small form factor (SFF) computer system from a single PCI card to conserve the number of available expansion slots.
  • Setup a RAID 1 mirror for data redundancy/duplication or RAID 0 stripe for increased performance with up to 4 SATA drives.
OS Compatibility:
  • Windows® 10 (32/64), 8 / 8.1 (32/64), 7 (32/64), Vista (32/64), XP (32/64), 2000
  • Windows Server® 2012, 2008 R2, 2003
  • Linux
    		•
    Marketing Information: Add 4 SATA ports to your PC through a PCI expansion slot, with support for high-performance RAID array installation. The PCISATA4R1 4 Port PCI SATA RAID Controller lets you add four internal SATA 1.0 (1.5 Gbps) ports to your PC through a single PCI expansion slot, while offering support for several RAID modes or a simple JBOD (Just a Bunch of Disks) configuration.

    The PCI SATA card provides increased performance and capacity with RAID 0 (Striping), or a redundant copy of your hard drive with RAID 1 (Mirroring). Configuring in RAID 10 (a.k.a. RAID 0+1) lets you leverage both by creating a mirrored copy of your striped disk set. Plus, the SATA RAID card supports RAID 1+S (Mirror + Spare), which uses a third installed drive to automatically replace a failed drive and rebuild the mirrored set – even if it is the boot drive that failed.

    For the ability to fit most standard computer cases, the card ships with a standard profile bracket installed and includes a low profile bracket for adapting to slimline or small form factor systems.

    Note: While the PCISATA4R1 card supports any size hard drive in JBOD mode, the max supported drive size when in RAID mode is 2 TB (per port).

    Backed by a StarTech.com lifetime warranty and free lifetime technical support.
    Product Type: SATA Controller
    Host Interface: PCI
    Maximum Data Transfer Rate: 150
    System Requirements:

    Operating System(s):

    • Windows 2000
    • Windows XP (32/64-bit)
    • Windows Server 2003 (32/64-bit)
    • Windows Server 2008 R2
    • Windows Vista (32/64-bit)
    • Windows 7 (32/64-bit)
    • Windows 8 (32/64-bit)
    • Linux
    Total Number of SATA Ports: 4
    Product Model: PCISATA4R1
    Compatibility:
    • Plug and Play

    Supported Operating System:

    • Windows 98
    • Windows 98SE
    • Windows Me
    • Windows NT 4.0
    • Windows 2000
    • Windows XP
    • Windows Server 2003 and up
    RAID Levels: 0, 1, 0+1, 10, 1+S, JBOD