STMicroelectronics - EMIF06-USD04F3

TDK's MPZ1608S102ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 0.8A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers 1000 ohm output impedance and operates b/w -55 to 125 °C. Ideal for data line filtering in surface mount applications.

DLW5BTM142TQ2L by Murata is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. It has a min insulation resistance of 10 Mohm and output impedance of 1400 ohm. Ideal for applications requiring noise suppression in data lines.

TDK's MPZ1005S121CTD25 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.09 ohm, and an output impedance of 120 OHM. Ideal for surface mount applications in electronics to reduce electromagnetic interference.

FBMH4532HM681-T by Taiyo Yuden is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.

Wurth Elektronik 742792716 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it's ideal for surface mount applications requiring output impedance of 60 ohm and rated current of 0.3A.

Wurth Elektronik 7427927112 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.35A. It operates b/w -55 to 125°C, has a DC resistance of 0.35 ohm, and an output impedance of 120Ω. Ideal for surface mount applications in electronics to reduce electromagnetic interference.

Wurth Elektronik 744235110 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 60V, inductance of 11uH, and max operating temp of 125°C. Ideal for applications requiring noise suppression in automotive electronics.

BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.

Murata Manufacturing's NFW31SP106X1E4L is a 3-terminal data line filter with 30 dB attenuation at 1000 MHz. It operates b/w -40 to 85 °C and has a rated voltage of 25 V, making it ideal for high-frequency noise suppression in electronic devices. With dimensions of L3.2XB1.6XH1.8 mm, this surface mount filter offers max insertion loss of 30 dB and is suitable for tape and reel packaging applications.

MI0603J680R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 68 OHM output impedance. It operates b/w -40 to 125 °C, has a DC resistance of 0.1 ohm, and supports frequencies from 25 MHz to 1000 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.

TDK's MPZ1608S101AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temp of 125°C and min freq of 100 MHz. Ideal for data line filtering, it has a DC resistance of 0.03 ohm and output impedance of 100 ohm, suitable for surface mount applications.

TDK's MPZ1608D101BTA00 is a 0603 chip bead filter with 2 terminals. With a max temp of 125°C and min of -55°C, it offers low DC resistance of 0.15 ohm. Ideal for data line filtering applications at frequencies ranging from 100 MHz, providing an output impedance of 100 OHM.

4400-076 by Cts is a Data Line Filter with FEED THROUGH CAPACITOR type, rated at 200V and 10A. It offers a max insertion loss of 28dB, operating b/w -55°C to 125°C. Ideal for panel mounting applications due to its silver terminal finish and capacitance of 100uF.

TPD4F003DQDR by Texas Instruments is a data line filter with 4 functions and 8 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount device is suitable for applications requiring protection against voltage spikes and noise in data lines.

Murata Manufacturing's BLM31AF700SN1L is a Ferrite Chip Data Line Filter with 2 terminals, 70 Ohm output impedance, and 0.15 ohm max DC resistance. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronic devices requiring noise suppression.

FLTR100V10Z by Abb is a 10A data line filter module with CSA approval. It operates at -40 to 100°C, has 5 terminals, and a max DC resistance of 0.014 ohm. Ideal for applications requiring noise suppression in data lines.

The TDK MPZ2012S331ATD25 is a FERRITE CHIP filter with 330 OHM output impedance and 2.5 A rated current. With AEC-Q200 screening, it's ideal for automotive applications requiring data line filtering. This surface mount device operates b/w -55 to 125 °C, making it suitable for harsh environments.

TDK's MMZ1608Y152BTD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 1500 ohms, it is ideal for surface mount applications in automotive electronics.

TDK's ACM2012H-900-2P-T03 is a data line filter with 10 Mohm min insulation resistance, 50V rated voltage, and 105°C max operating temp. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions of L2.0xB1.2xH1.2 mm.

Murata Manufacturing's NFE31PT222Z1E9B is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With dimensions of L3.2XB1.6XH1.6 (mm), it operates b/w -40 to 85 °C, making it ideal for applications requiring up to 6A rated current and 2200uF capacitance in surface mount configurations.