STMicroelectronics - EMIF06-VID01F2

ACT45B-510-2P by TDK is a data line filter with a rated voltage of 50V and a max operating temperature of 150°C. It has a min insulation resistance of 10 Mohm and is suitable for surface mount applications.

Wurth Elektronik 742792645 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for surface mount applications in electronics to achieve an output impedance of 470 OHM at a rated current of 1 A.

Murata Manufacturing's BL02RN2R1M2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and Through Hole Mount. Ideal for noise suppression in electronic circuits.

Wurth Elektronik 7427932 is a chip data line filter with 2 terminals, Ferrite Bead type, and 125°C max operating temp. Ideal for IEC-approved applications requiring filtering at frequencies b/w 25-100 MHz with low DC resistance of 0.0009 ohm. Suitable for surface mount installation in compact spaces due to its dimensions of L7.8xB4.75xH3.0 mm.

NFE31PT221D1E9L by Murata Manufacturing is a data line filter with a rated voltage of 25V and a capacitance of 220uF. It has a min insulation resistance of 1000 Mohm and is suitable for surface mount applications.

TDK's MPZ1608R391ATA00 is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has an output impedance of 390 ohms and can handle a rated current of 1.2A.

FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 8 A;

Murata's BLM18HE601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.25 ohm and an output impedance of 600 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.

MLB-321611-1200PL by Kitagawa Electronics is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, 1200 OHM output impedance, and operates b/w -55 to 125 °C. Ideal for applications requiring filtering at frequencies ranging from 100 MHz with a compact size of L3.2XB1.6XH1.1 mm for surface mount installation.

Murata Manufacturing's NFM21CC222R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2200uF capacitance. It is a feed through capacitor used in applications requiring surface mount filters for noise suppression.

Murata Manufacturing's BLM18BD102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.85 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 1000Ω and rated current of 0.1A.

TDK's ACT1210L-101-2P-TL00 is a Data Line Filter with 10 Mohm Min Insulation Resistance, 80V Rated Voltage, and 100uH Inductance. Ideal for applications requiring noise suppression in data lines while operating within -40 to 125 °C temperature range.

Murata Manufacturing's BLM18EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.04 ohm and an output impedance of 145 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 2A and is commonly used in electronic devices requiring noise suppression on data lines.

BLM15PG100SN1D by Murata is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.025 ohm, and output impedance of 10 OHM. Ideal for applications requiring filtering at frequencies up to 100 MHz in surface mount configurations.

Wurth Elektronik 744212331 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 330uH and max DC resistance of 0.3 ohm, it operates b/w -40 to 105 °C. Ideal for surface mount applications, dimensions are L6.5xB3.6xH1.65 mm, suitable for filtering data lines with an output impedance of 2000 OHM.

Murata Manufacturing's BNX003-01 is a data line filter with 3 functions, rated at 150V and 10A. It offers a max insertion loss of 40 dB and operates b/w -30 to 85°C. Ideal for applications requiring high insulation resistance and low DC resistance in a compact through-hole mount design.

Taiyo Yuden's FBMH3216HM221NT8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohms, operates b/w -40°C to 125°C, and has a max DC resistance of 0.02 ohm. Ideal for surface mount applications requiring noise suppression in data lines.

TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.

Wurth Elektronik 744272471 is a Data Line Filter with UL approval, rated at 80V and inductance of 470uH. It has 2 functions, operates b/w -40 to 125 °C, and offers a max DC resistance of 0.065 ohm. This filter is ideal for applications requiring noise suppression in data lines with a rated current of 1.6A.

TDK's MPZ1005S121CT000 is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. With dimensions of L1.0xB0.5xH0.5 mm, it operates b/w -40 to 85°C and is ideal for surface mount applications in filtering frequencies up to 100 MHz.