L9907 by STMicroelectronics | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	STMicroelectronics
Manufacturer's Part Number	L9907
Description	BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES; Maximum Seated Height: 1.2 mm;
Datasheet	L9907 Datasheet
In Stock	3,551

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Width (mm):	10 mm
Maximum Seated Height:	1.2 mm
Minimum Supply Voltage (Vsup):	3.2 V
Maximum Supply Current (Isup):	20 mA
Sub-Category:	Motion Control Electronics
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	64
Terminal Position:	QUAD
Package Style (Meter):	FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
Screening Level:	AEC-Q100
JESD-30 Code:	S-PQFP-G64
Package Shape:	SQUARE
Terminal Form:	GULL WING
Package Code:	HTFQFP
Nominal Supply Voltage (Vsup):	3.3 V
Moisture Sensitivity Level (MSL):	3
JESD-609 Code:	e4
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	HQFP64,.40SQ,20
Other IC type:	BRUSHLESS DC MOTOR CONTROLLER
Length:	10 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Maximum Supply Voltage (Vsup):	5.25 V
Power Supplies (V):	7/18

Pricing (USD)

Qty.	Unit Price	Ext. Price
3,551	-	-

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.