M14C32-WD20 by STMicroelectronics | Memory ICs

Image shown is a representation only.

Manufacturer	STMicroelectronics
Manufacturer's Part Number	M14C32-WD20
Description	EEPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIE; Package Shape: RECTANGULAR; Terminal Position: UPPER;
Datasheet	M14C32-WD20 Datasheet
In Stock	3,224

NAME	DESCRIPTION
Package Body Material:	UNSPECIFIED
Maximum Standby Current:	.000002 Amp
Organization:	32KX1
Minimum Supply Voltage (Vsup):	2.5 V
Sub-Category:	EEPROMs
Surface Mount:	YES
Maximum Supply Current:	2 mA
Maximum Write Cycle Time (tWC):	10 ms
No. of Terminals:	8
I2C Control Byte:	1010000R
Maximum Clock Frequency (fCLK):	.4 MHz
No. of Words:	32768 words
Terminal Position:	UPPER
Package Style (Meter):	UNCASED CHIP
Write Protection:	HARDWARE
Technology:	CMOS
JESD-30 Code:	R-XUUC-N
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Operating Mode:	SYNCHRONOUS
Maximum Operating Temperature:	70 Cel
Endurance:	1000000 Write/Erase Cycles
Package Code:	DIE
Moisture Sensitivity Level (MSL):	1
Serial Bus Type:	I2C
Memory Density:	32768 bit
Memory IC Type:	EEPROM
Minimum Operating Temperature:	0 Cel
Memory Width:	1
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	MODULE,8LEAD,.4
No. of Words Code:	32K
Nominal Supply Voltage / Vsup (V):	3.3
Minimum Data Retention Time:	40
Parallel or Serial:	SERIAL
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	5.5 V
Power Supplies (V):	3/5

Pricing (USD)

Qty.	Unit Price	Ext. Price
3,224	-	-

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;