M34D32WMN5T by STMicroelectronics | Memory ICs

Image shown is a representation only.

Manufacturer	STMicroelectronics
Manufacturer's Part Number	M34D32WMN5T
Description	EEPROM CARD; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Current: 1 mA;
Datasheet	M34D32WMN5T Datasheet
In Stock	1,201

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Standby Current:	.000002 Amp
Organization:	4KX8
Programming Voltage (V):	2.7
Sub-Category:	EEPROMs
Surface Mount:	YES
Maximum Supply Current:	1 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	8
I2C Control Byte:	1010DDDR
No. of Words:	4096 words
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Write Protection:	HARDWARE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Endurance:	1000000 Write/Erase Cycles
Package Code:	SOP
Serial Bus Type:	I2C
Memory Density:	32768 bit
Memory IC Type:	EEPROM CARD
JESD-609 Code:	e4
Minimum Operating Temperature:	-20 Cel
Memory Width:	8
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.25
No. of Words Code:	4K
Minimum Data Retention Time:	40
Parallel or Serial:	SERIAL
Terminal Pitch:	1.27 mm
Temperature Grade:	OTHER
Power Supplies (V):	3/5

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,201	-	-

Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;