TS1220-700H by STMicroelectronics | Triggering Devices

Image shown is a representation only.

Manufacturer	STMicroelectronics
Manufacturer's Part Number	TS1220-700H
Description	SCR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
Datasheet	TS1220-700H Datasheet
In Stock	141

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Trigger Device Type:	SCR
Configuration:	SINGLE
Sub-Category:	Silicon Controlled Rectifiers
Surface Mount:	NO
Maximum Leakage Current:	2 mA
Minimum Critical Rate of Rise of Off-state Voltage:	5 V/us
Maximum Holding Current:	5 mA
No. of Terminals:	3
Terminal Position:	SINGLE
Package Style (Meter):	IN-LINE
JESD-30 Code:	R-PSIP-T3
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	125 Cel
Case Connection:	ANODE
Repetitive Peak Off-state Voltage:	700 V
Maximum RMS On-state Current:	12 A
Repetitive Peak Reverse Voltage:	700 V
Minimum Operating Temperature:	-40 Cel
Non Repetitive Peak On-state Current:	115 A
Maximum DC Gate Trigger Voltage:	.8 V
Maximum DC Gate Trigger Current:	.2 mA
Qualification:	Not Qualified
Maximum On-state Current:	8 A

Pricing (USD)

Qty.	Unit Price	Ext. Price
141	-	-

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;