TSU111IQ1T by STMicroelectronics | Amplifiers

Image shown is a representation only.

Manufacturer	STMicroelectronics
Manufacturer's Part Number	TSU111IQ1T
Description	OPERATIONAL AMPLIFIER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Terminal Pitch: .4 mm;
Datasheet	TSU111IQ1T Datasheet
In Stock	3,773

NAME	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Low-Bias:	Yes
Maximum Seated Height:	0.016 in (0.4 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	6 V
Maximum Bias Current (IIB) @25C:	10 pA
Sub-Category:	Operational Amplifiers
Maximum Supply Current:	1.62 μA
Surface Mount:	Yes
No. of Terminals:	6
Maximum Input Offset Voltage:	235 uV
Nominal Unity Gain Bandwidth:	10 kHz
Terminal Position:	Dual
Package Style (Meter):	Small Outline, Very Thin Profile
Technology:	CMOS
JESD-30 Code:	R-PDSO-N6
Low-Offset:	Yes
Minimum Voltage Gain:	56234
Package Shape:	Rectangular
Terminal Form:	No Lead
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	VSON
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	0.0025 V/us
Width:	0.047 in (1.2 mm)
Architecture:	Voltage Feedback
Nominal Common Mode Reject Ratio:	107 dB
Packing Method:	Tape And Reel
Programmable Power:	No
Micropower:	Yes
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	50 pA
No. of Functions:	1
Minimum Common Mode Reject Ratio:	71 dB
Package Equivalence Code:	SOLCC6,.05,16
Length:	0.051 in (1.3 mm)
Nominal Supply Voltage / Vsup (V):	1.8 V
Terminal Pitch:	0.016 in (0.4 mm)
Power:	No
Wideband:	No

Pricing (USD)

Qty.	Unit Price	Ext. Price
3,773	$1.840	$6,942.320

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;