X7DCL-3-B by Supermicro Computer, Inc

Image shown is a representation only.

Manufacturer Supermicro Computer, Inc
Manufacturer's Part Number X7DCL-3-B
Description Supermicro; Product Model: X7DCL-3; Product Type: Server Motherboard; Chipset Model: 5100; Onboard LEDs Header: Yes; Marketing Information: X7DCL-3 Server Board is designed with the utmost attention to detail to provide you with the highest standards in quality and performance.;
NAME DESCRIPTION
Chipset Manufacturer: Intel
Number of SATA Interfaces: 6
Processor Technology: Enhanced SpeedStep Technology
Processor Supported: Xeon
Memory Speed Supported: 667 MHz, 533 MHz
Chipset Model: 5100
Controller Type: Floppy Controller, Serial Attached SCSI (SAS), Serial ATA/300, Ultra ATA/100 (ATA-6)
Serial Port: Yes
Number of USB 2.0 Ports: 2
Maximum Memory Supported: 32 GB
Total Number of USB Ports: 2
Depth: 10 "
Form Factor: ATX
Memory Technology: DDR2 SDRAM
Onboard Video: On-board Video Chipset
Total Number of Onboard USB Ports: 3
Additional Information:
  • ROHS Compliant
  • Dual Channel memory supported

Chipset:

  • Northbridge: Intel 5100 (San Clemente)
  • Southbridge: Intel ICH9R

BIOS Features:

  • 8Mb Flash EEPROM with Phoenix BIOS
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0/2.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.3

Hardware Monitoring:

  • Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
  • CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
  • Total of six 4-pin fans
  • 6x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support for 3-pins (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
  • CPU / System Overheat LED
  • Suspend-state Indicator LED
  • Chassis intrusion detection
  • Chassis intrusion header
  • Chipkill Support
  • Onboard voltage monitors for CPU core voltage, Memory voltage, +1.8V, +3.3V, +5V, +12V, 12V, +3.3V standby, +5V standby and VBAT)
  • Fan status monitor with firmware control
  • CPU/chassis temperature monitors
  • Low noise fan speed control
  • Platform Environment Control Interface (PECI) ready
  • CPU fan auto-off in sleep mode
  • Pulse Width Modulation (PWM) fan control
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • CPU slow-down on temperature overheat
  • CPU thermal trip support for processor protection
  • Power-up mode control for recovery from AC power loss
  • Chassis intrusion detection
  • System resource alert via Supero Doctor III

ACPI Features:

  • Slow blinking LED for suspend state indicator
  • Main switch override mechanism
  • ACPI Power Management
  • Power-on mode for power recovery

Support CD Contents:

  • Device drivers
  • Software
Number of PCI Express x8 Slots: 3
Graphics Controller Memory: 32 MB
Processor Socket: Socket J LGA-771
Number of SAS Interfaces: 8
Number of PCI Slots: 3
Product Model: X7DCL-3
SAS Controller: Yes
Number of IDE Interfaces: 1
Width: 12.05 "
Graphics Controller Manufacturer: XGI
Number of Memory Slots: 6
Product Name: X7DCL-3 Server Motherboard
Total Number of PCI Express Slots: 3
Graphics Controller Model: Z9s
Package Type: Bulk
Brand Name: Supermicro
VGA: Yes
Marketing Information:

X7DCL-3 Server Board is designed with the utmost attention to detail to provide you with the highest standards in quality and performance.
Network (RJ-45): Yes
Total Processor Supported: 2
Product Type: Server Motherboard
Onboard LEDs Header: Yes
Number of Total Expansion Slots: 6
Memory Standard: DDR2-667/PC2-5300, DDR2-533/PC2-4200
Front Side Bus: 1333 MHz, 1066 MHz
Gigabit Ethernet: Yes