Taiyo Yuden - LLMGA453232L202RG

BLM15AX100SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1.74A, and max operating temp of 125°C. It has a ferrite chip construction, DC resistance of 0.015 ohm, and output impedance of 10 ohm. Ideal for surface mount applications in electronics to suppress noise interference at frequencies ranging from 100 MHz.

Wurth Elektronik 744235601 is a Data Line Filter with 2 functions, rated voltage of 60V, and inductance of 1uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.1 ohm. Ideal for applications requiring noise suppression in data lines with a current rating of 1.2A.

TDK's MPZ2012S601AT000 is an 0805 chip bead filter with a ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for data line filtering applications due to its compact size and high rated current of 2 A.

Vishay Intertechnology's ILHB0603RK121V is a FERRITE CHIP filter with 2 terminals, 120 OHM output impedance, and 2A rated current. Ideal for data line applications, it operates b/w -55°C to 125°C and has a compact size of L1.6xB0.8xH0.8 mm for surface mount installation.

DATA LINE FILTER;

BLM31PG601SN1D by Murata is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600 OHM output impedance. Operating b/w -55 to 125 °C, it's ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) dimensions and low DC resistance of 0.09 ohm.

Laird Technologies' LI0805G301R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 mm, it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 ohm. Ideal for surface mount applications, it has a max DC resistance of 0.2 ohm and rated current of 0.7 A.

FEED THROUGH CAPACITOR; Rated Current: 5 A; Terminal Finish: Gold (Au); Mounting Type: THROUGH HOLE MOUNT; Maximum Insertion Loss: 60 dB; Minimum Insulation Resistance: 10000 Mohm;

The Fastron Electronics TLC/0.1A-101M-00 is a Data Line Filter with 100uH inductance, 0.94 ohm max DC resistance, and 0.1A rated current. It operates b/w -55°C to 115°C and has AEC-Q200 & MIL-STD-202G approvals. Ideal for applications requiring noise suppression in data transmission lines.

Wurth Elektronik 744220103 is a Data Line Filter with 2 functions, rated at 80V. It has a max operating temperature of 125°C and DC resistance of 1.2 ohm. Ideal for IEC-approved applications requiring filtering in data lines with surface mounting type.

TDK MMZ1608S601ATD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 600 ohm, it is ideal for automotive applications due to AEC-Q200 screening level compliance.

Murata Manufacturing's NFM18PC104R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring filtering of electrical signals.

FERRITE CHIP; Maximum DC Resistance: .8 ohm; Rated Current: .2 A; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; No. of Terminals: 2;

NFM41CC223R2A3L by Murata Manufacturing is a data line filter with a rated voltage of 100V and capacitance of 22000uF. It has a min insulation resistance of 10000 Mohm and is commonly used in applications requiring noise suppression in electronic circuits.

Vishay Intertechnology's ILHB0603RK600V is a FERRITE CHIP filter with 2 terminals, 60 OHM output impedance, and 2A rated current. Operating b/w -55°C to 125°C, it has a max DC resistance of 0.1 ohm. Ideal for data line filtering in compact surface mount applications.

Murata Manufacturing's DLW43SH101XK2B is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 2 ohm max DC resistance. It has 4 terminals, rated for 0.2A current at 50V. Ideal for automotive applications due to AEC-Q200 screening level.

The TDK MPZ1608S221AT is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max operating temperature of 125°C and DC resistance of 0.05 ohm. This ferrite chip filter has an output impedance of 220 ohm and is suitable for frequencies ranging from 100 MHz, making it perfect for noise suppression in electronic circuits.

Taiyo Yuden's FCFBMJ3216HS800-T is a Ferrite Chip Data Line Filter with 2 terminals, 80 Ohm output impedance, and 4A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C, offering low DC resistance of 0.01 ohm.

NUF6400MNTBG by Onsemi is a 6-function data line filter with 30 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data transmission systems.

Bourns MH2029-301Y is a chip bead data line filter with 2 terminals. It offers 0.2 Mohm min insulation resistance, 100 MHz min frequency, and 1 A rated current. Ideal for applications requiring surface mount filters in compact dimensions like L2.0XB1.2XH0.9 (mm).