TDK - ACF451832-333

NZF220DFT1G by Onsemi is a Data Line Filter with 2 functions and 5 terminals. Featuring FERRITE CHIP filter type, it has a width of 1.35mm and max DC resistance of 110 ohm. Ideal for applications requiring a compact surface mount solution with an output impedance of 50 OHM.

TDK's ACM2012-900-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.4A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics.

MI0805J102R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it has a max frequency of 1000 MHz and DC resistance of 0.15 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression up to 25 MHz.

Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.

NFA31CC102R1E4D by Murata Manufacturing is a data line filter with 4 functions and a rated voltage of 25V. It has a capacitance of 1000uF and is commonly used in applications requiring noise suppression and EMI filtering.

BKP2125HS600-TV by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals, rated for 3A current. It offers a max DC resistance of 0.025 ohm and an output impedance of 60 ohm. Ideal for surface mount applications in electronics, it operates b/w -55 to 85 °C temperatures.

IP4252CZ8-4-TTL,13 by NXP Semiconductors is a data line filter with 8 terminals. It operates b/w -40°C to 85°C and is surface mountable. Ideal for applications requiring noise filtering in data transmission systems.

Murata Manufacturing's BNX003-11 is a Data Line Filter with 2 functions, rated at 150V and 10A. It offers a max insertion loss of 40 dB, operates b/w -40 to 85°C, and has an output impedance of 50 ohms. Ideal for applications requiring noise suppression in data lines.

Wurth Elektronik 7448262013 Data Line Filter has UL approval, rated voltage of 250V, and inductance of 1300uH. With dimensions L43.5xB23.5xH43.0 (mm), it is ideal for applications requiring a max operating temperature of 125°C and min of -40°C, rated current up to 20A.

FLTR100V10Z by Abb is a 10A data line filter module with CSA approval. It operates at -40 to 100°C, has 5 terminals, and a max DC resistance of 0.014 ohm. Ideal for applications requiring noise suppression in data lines.

Wurth Elektronik 742792035 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it is designed for surface mount installation in electronic devices up to 220 MHz frequency range.

FBMJ4516HS111-T by Taiyo Yuden is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.

Murata BL01RN1A1D2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range. Through-hole mount, D3.6xH5.0mm dimensions make it ideal for noise suppression in electronic circuits.

Murata Manufacturing's BLM18EG221SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.05 ohm and output impedance of 260 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 2A and is commonly used in electronic devices requiring noise suppression on data lines.

MPZ2012S221AT000 by TDK is a chip bead data line filter with dimensions of 2x1.25x0.85mm, suitable for surface mount applications. It has a max operating temperature of 125°C and offers an output impedance of 220 ohms at a min frequency of 100 MHz. Ideal for noise suppression in electronic circuits requiring high-frequency filtering.

MMZ2012S102AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.35 ohm and rated current of 0.5 A, making it suitable for surface mount applications in electronic devices requiring noise suppression.

TDK's MPZ2012S221ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0xB1.25xH0.85 (mm), it has an output impedance of 220 ohm and max operating temp of 125°C. Ideal for data line filtering applications due to its compact size and surface mounting type.

Laird Technologies' HZ0603B102R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.6 ohm and output impedance of 1000 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.

Murata Manufacturing's BLM18HD601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and can handle frequencies from 100MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 1.5Ω and rated current of 0.1A, making it suitable for noise suppression in electronic circuits.

Taiyo Yuden's FBMH1608HM600-T is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications, this compact filter measures L1.6xB0.8xH0.8mm and is designed for frequencies up to 100MHz.