TDK - ACM2012H-900-2P-T00

FBMJ3216HS800-TV by Taiyo Yuden is a ferrite chip data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L3.2XB1.6XH1.1 (mm) and is suitable for applications requiring an output impedance of 80 ohms and a rated current of 4A.

MMZ2012R601AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 mm, it has a max DC resistance of 0.2 ohm and output impedance of 600 ohm, suitable for surface mount applications in electronics for noise suppression and signal filtering purposes.

Murata Manufacturing's BLM18PG471SN1J is a chip bead data line filter with 2 terminals, 0603 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.2 ohm, and output impedance of 470 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies up to 100 MHz.

MLB-321611-1200PL by Kitagawa Electronics is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, 1200 OHM output impedance, and operates b/w -55 to 125 °C. Ideal for applications requiring filtering at frequencies ranging from 100 MHz with a compact size of L3.2XB1.6XH1.1 mm for surface mount installation.

TDK's MMZ1608Y601BTA00 is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 mm, it offers an output impedance of 600 ohm and rated current of 0.5 A, ideal for surface mount applications in electronics.

TDK's ACT1210L-101-2P-TL00 is a Data Line Filter with 10 Mohm Min Insulation Resistance, 80V Rated Voltage, and 100uH Inductance. Ideal for applications requiring noise suppression in data lines while operating within -40 to 125 °C temperature range.

TDK's MMZ1608B601CTDH5 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 600 ohms, it is ideal for automotive applications due to its AEC-Q200 screening level.

DLW32MH101XT2L by Murata Manufacturing is a data line filter with 2 functions. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 125 °C. This filter is commonly used in automotive applications due to its AEC-Q200 screening level.

504-6 by West Coast Magnetics is a data line filter with 2 functions and 4 terminals. It has an inductance of 110 uH and max DC resistance of 0.0024 ohm. This surface mount filter is used for noise suppression in data lines.

Murata Manufacturing's NFE31PT152Z1E9L is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With a capacitance of 1500uF, it operates b/w -40 to 85 °C, making it ideal for surface mount applications requiring up to 6A current.

TDK's MPZ2012S101AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and has a rated current of 4A.

Murata Manufacturing's BLM15EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.095 ohm and output impedance of 120 ohm. Ideal for applications requiring filtering in the frequency range of 100-1000 MHz.

Laird Technologies' MI0603J601R-10 is a chip bead data line filter with 2 terminals, operating from -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.2 ohm and an output impedance of 600 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1A and is commonly used in electronic devices requiring noise suppression on data lines.

FBMH4532HM681-T by Taiyo Yuden is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.

TE Connectivity's BMB2A0300LN2 is a 0805 case FERRITE CHIP filter with 300 OHM output impedance, 0.15 ohm DC resistance, and 0.6 A rated current. Ideal for data line filtering applications, this multilayer chip operates b/w -55 to 125 °C at frequencies ranging from 100 MHz.

Murata Manufacturing's BL01RN1A1F1J is a data line filter with a ferrite bead filter type. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This through-hole mount filter has dimensions of D3.6XH5.0 (mm) and is suitable for applications requiring a rated current of 6 A.

Wurth Elektronik 742792117 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max frequency of 600 MHz, DC resistance of 0.005 ohm, and output impedance of 48 OHM. Ideal for data line filtering applications due to its rated current of 6 A and surface mounting type.

LFBKP2125HS221-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 85°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for applications requiring an output impedance of 220 OHM, rated current of 2A, and surface mounting type.

Laird Technologies' 35F0121-0SR-10 is a chip bead data line filter with 2 terminals, rated for 10A current. With dimensions of L4.06XB3.05XH2.54 mm, it operates b/w -45 to 125 °C and offers an output impedance of 36 OHM. Ideal for surface mount applications, this filter has a max frequency of 13 MHz and DC resistance of 0.0008 ohm.

Wurth Elektronik 744233670 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has approval from IEC and is used for filtering data lines in electronic applications.