1825173-3 by TE Connectivity | Switches

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	1825173-3
Description	PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PUSHBUTTON; Contact Function: (ON)-ON; Solderability: WAVE;
Datasheet	1825173-3 Datasheet

NAME	DESCRIPTION
Maximum DC Contact Current:	.05 A
Center Contact Plating:	GOLD OVER NICKEL
Center Contact Material:	PHOSPHOR BRONZE
Type (Bushing):	UNTHREADED
Length (Bushing):	.04 inch
Body Color:	GRAY
Type (Actuator):	PUSHBUTTON
Maximum AC Contact Voltage:	48 V
Solderability:	WAVE
Actuator Travel (mm):	1.1938
Switch Action:	MOMENTARY
Terminal Material:	PHOSPHOR BRONZE
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Material (Actuator):	COPPER ALLOY
Insulation Resistance:	1000000000 ohm
Color (Actuator):	BLACK
Maximum AC Contact Current:	.05 A
End Contact Material:	PHOSPHOR BRONZE
Angle (Actuator):	0 deg
Other Names:	APA1FGPC04 APA1FGPC04-ND
Maximum DC Contact Voltage:	48 V
DC Maximum Rating R Load (Contact):	.05A@48VDC
Dielectric Withstand Volts (V):	500VRMS
Contact Function:	(ON)-ON
PCB Hole Count:	3
Switch Type:	PUSHBUTTON SWITCH
AC Maximum Rating R Load (Contact):	.05A@48VAC
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Body Width:	7.62 inch
Switch Function:	SPDT
Terminal Length:	.14 inch
Length (Actuator):	.12 inch
End Contact Plating:	GOLD OVER NICKEL
Insulator Material:	POLYBUTYLENE TEREPHTHALATE
Body Height:	8 mm
Additional Features:	UL
Body Length/Diameter:	9.55 mm
Diameter (Bushing):	.125 inch

Popular Products

USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.