Image shown is a representation only.
| Manufacturer | TE Connectivity |
|---|---|
| Manufacturer's Part Number | 3-1462034-0 |
| Description | RF RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: LATCHED; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CECC; CSA; EN; ICEQ; IEC; UL; |
| Datasheet | 3-1462034-0 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum Isolation: | -34 dB |
| Maximum Contact AC Power Rating (R Load): | 62.5VA@250VAC |
| Maximum DC Contact Current: | 2 A |
| Voltage Standing Wave Ratio: | 1.45 |
| Relay Function: | DPDT |
| DC Coil Release Voltage: | 3.75 V |
| Dielectric Strength Between Open Contacts: | 1.8 kVrms |
| Contact or Output Supply Type: | AC/DC |
| Relay Type: | RF Relay |
| Coil or Input Supply Type: | DC |
| Relay Form: | 2 Form C |
| Operate Time: | 9 ms |
| Electrical Life: | 500000 Cycle(s) |
| Release Time: | 9 ms |
| Insulation Resistance: | 1 GΩ |
| Maximum Insertion Loss: | -0.03 dB |
| Maximum DC Coil Current: | 20 mA |
| Maximum DC Contact Voltage: | 220 V |
| Maximum Input Power: | 60 W |
| Packing Method: | Box; Tube |
| Coil Resistance: | 250 Ω |
| Sealing: | IP67 |
| Weight: | 2.5 g |
| Relay Action: | Latched |
| Body Width: | 7.27 in (184.658 mm) |
| Characteristic Impedance: | 50 Ω |
| End Contact Plating: | Gold |
| Physical Dimension: | 0.588 x 0.286 x 0.421 in (14.93 x 7.27 x 10.7 mm) |
| Additional Features: | Release Time with Diode |
| Body Height: | 0.421 in (10.7 mm) |
| Body Length/Diameter: | 0.588 in (14.93 mm) |
| Maximum Contact AC Rating (R Load): | 2A@250VAC |
| Nominal Coil Voltage: | 5 V |
| Minimum Operating Frequency: | 100 MHz |
| Switching Time: | 18 ms |
| Maximum AC Contact Voltage: | 250 V |
| Maximum Contact DC Rating (R Load): | 2A@220VDC |
| No. of Terminals: | 8 |
| Termination Type: | Solder |
| DC Coil Operate Voltage: | 3.75 V |
| Maximum Operating Temperature: | 85 °C (185 °F) |
| Contact Resistance: | 70 mΩ |
| Input Switching Control Type: | Random |
| Maximum AC Contact Current: | 2 A |
| End Contact Material: | Palladium Ruthenium |
| PCB Hole Count: | 8 |
| Maximum Contact DC Power Rating (R Load): | 60W@220VDC |
| Minimum Operating Temperature: | -55 °C (-67 °F) |
| Mounting Feature: | Through Hole-Straight Mount |
| Maximum DC Coil Voltage: | 5 V |
| Dielectric Strength Between Coil & Contacts: | 1.8 kVrms |
| Terminal Length: | 0.1299 in (3.299 mm) |
| Reference Standard: | CECC; CSA; EN; ICEQ; IEC; UL |
| Maximum Operating Frequency: | 900 MHz |
| Coil Power (mW): | 100 mW |
