Image shown is a representation only.
| Manufacturer | TE Connectivity |
|---|---|
| Manufacturer's Part Number | ASE42 |
| Description | SLIDE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PDT; Type (Actuator): EXTENDED TOP TYPE; Contact Function: ON-ON; Minimum Operating Temperature: -20 Cel; |
| Datasheet | ASE42 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .3 A |
| Center Contact Plating: | SILVER |
| No. of Independent Keys: | 1 |
| Type (Actuator): | EXTENDED TOP TYPE |
| Maximum AC Contact Voltage: | 115 V |
| Switch Action: | LATCHED |
| Terminal Material: | COPPER ALLOY |
| Termination Type: | SOLDER |
| Electrical Life: | 10000 Cycle(s) |
| Maximum Operating Temperature: | 100 Cel |
| Material (Actuator): | NYLON |
| Contact Resistance: | 40 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Color (Actuator): | WHITE |
| Maximum AC Contact Current: | .3 A |
| End Contact Material: | COPPER ALLOY |
| Angle (Actuator): | 0 deg |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | .3A@115VDC |
| Dielectric Withstand Volts (V): | 1000VRMS |
| Contact Function: | ON-ON |
| Packing Method: | TUBE |
| Switch Type: | SLIDE SWITCH |
| Minimum Operating Temperature: | -20 Cel |
| Mounting Feature: | PANEL MOUNT |
| Body Width: | 7.37 inch |
| Switch Function: | 4PDT |
| Contact Timing: | MAKE-BEFORE-BREAK |
| Terminal Length: | .16 inch |
| Length (Actuator): | .11 inch |
| End Contact Plating: | SILVER |
| Insulator Material: | POLYESTER |
| Body Height: | 8.509 mm |
| Body Length/Diameter: | 17.78 mm |
| Washability: | SOLVENT |
