TE Connectivity - G-10-P1

G-10-P1 by TE Connectivity

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	G-10-P1
Description	CONNECTOR ACCESSORY; Rated Current: 7.5 A; Maximum Wire Size: 20 AWG; Finish Thickness: 50; MIL-Connector Accessory Name: CONTACT; Minimum Wire Size: 24 AWG;
Datasheet	G-10-P1 Datasheet

G-10-P1 Technical Details

NAME	DESCRIPTION
MIL-Connector Accessory Name:	CONTACT
Other Names:	4306-G10P1
Wire Gauge (AWG):	20
Usage:	AMPLIMITE
Maximum Wire Size:	20 AWG
Terminal Type:	CRIMP
IEC Conformity:	NO
Material:	COPPER ALLOY
Minimum Operating Temperature:	-55 Cel
Cross Section Area:	.6 mm2
Minimum Wire Size:	24 AWG
Design:	SIGNAL
MIL Conformity:	YES
Finish Thickness:	50
Contact Gender:	MALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Maximum Operating Temperature:	125 Cel
Rated Current:	7.5 A
DIN Conformity:	NO

Popular Products

1N4148

Iskra Semic Capacitors Industry

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;

LL4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

ECS-.327-12.5-17X-TR

Ecs International

ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

OHN3140U

Tt Electronics Plc

OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Category Top Products