IM07NS by TE Connectivity | Relays

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	IM07NS
Description	RF RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: UL;
Datasheet	IM07NS Datasheet

NAME	DESCRIPTION
Maximum Isolation:	-37 dB
Maximum DC Contact Current:	2 A
Voltage Standing Wave Ratio:	1.49
Relay Function:	DPDT
Minimum Operating Frequency:	100 MHz
Switching Time:	18 ms
Maximum AC Contact Voltage:	250 V
DC Coil Release Voltage:	2.4 V
Dielectric Strength Between Open Contacts:	750 Vrms
Contact or Output Supply Type:	AC/DC
Maximum Contact DC Rating (R Load):	5A@220VDC
Relay Type:	RF Relay
Coil or Input Supply Type:	DC
Relay Form:	2 Form C
Termination Type:	Solder/Quick Connect
Operate Time:	8 ms
Electrical Life:	100000 Cycle(s)
DC Coil Operate Voltage:	18 V
Release Time:	10 ms
Maximum Operating Temperature:	85 °C (185 °F)
Insulation Resistance:	1000 GΩ
Maximum Insertion Loss:	-0.03 dB
Maximum DC Coil Current:	8 mA
Maximum AC Contact Current:	2 A
End Contact Material:	Lead Ruthenium
Maximum DC Contact Voltage:	220 V
Maximum Input Power:	60 W
Packing Method:	Tube
Coil Resistance:	2.88 kΩ
Sealing:	IP67/RT5
Minimum Operating Temperature:	-40 °C (-40 °F)
Weight:	750 mg
Mounting Feature:	Panel Mount
Relay Action:	Momentary
Body Width:	5.7 in (144.78 mm)
Maximum DC Coil Voltage:	24 V
Dielectric Strength Between Coil & Contacts:	1.8 kVrms
Physical Dimension:	0.39 in x 0.22 in x 0.23 in (10 mm x 5.7 mm x 5.8 mm)
Additional Features:	Release Time with Diode
Body Height:	0.228 in (5.8 mm)
Body Length/Diameter:	0.394 in (10 mm)
Reference Standard:	UL
Maximum Operating Frequency:	900 MHz
Coil Power (mW):	200 mW
Maximum Contact AC Rating (R Load):	5A@250VAC

Popular Products

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;