Image shown is a representation only.
| Manufacturer | TE Connectivity |
|---|---|
| Manufacturer's Part Number | KUHP-11DT1-12 |
| Description | POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; |
| Datasheet | KUHP-11DT1-12 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | 20 A |
| Relay Function: | DPDT |
| Maximum AC Contact Voltage: | 240 V |
| Dielectric Strength Between Open Contacts: | 1.2 kVrms |
| Contact or Output Supply Type: | AC/DC |
| Maximum Contact DC Rating (R Load): | 20A@28VDC |
| Relay Type: | Power/Signal Relay |
| Coil or Input Supply Type: | DC |
| Relay Form: | 2 Form C |
| Termination Type: | Solder/Quick Connect |
| Operate Time: | 20 ms |
| Electrical Life: | 100000 Cycle(s) |
| DC Coil Operate Voltage: | 9 V |
| Release Time: | 20 ms |
| Maximum Operating Temperature: | 70 °C (158 °F) |
| Insulation Resistance: | 100 MΩ |
| Maximum DC Coil Current: | 100 mA |
| Maximum AC Contact Current: | 20 A |
| End Contact Material: | Silver Cadmium Oxide |
| Maximum DC Contact Voltage: | 28 V |
| Coil Resistance: | 120 Ω |
| Sealing: | Dust Proof |
| Minimum Operating Temperature: | 50 °C (122 °F) |
| Weight: | 92 g |
| Mounting Feature: | Panel Mount |
| Relay Action: | Momentary |
| Body Width: | 35.4 in (899.16 mm) |
| Maximum DC Coil Voltage: | 12 V |
| Dielectric Strength Between Coil & Contacts: | 3.75 kVrms |
| Physical Dimension: | 1.531 x 1.406 x 1.906 in (38.9 x 35.7 x 48.4 mm) |
| Body Height: | 2.461 in (62.5 mm) |
| Body Length/Diameter: | 1.5 in (38.1 mm) |
| Reference Standard: | CSA; UL |
| Coil Power (mW): | 1.2 W |
| Maximum Contact AC Rating (R Load): | 20A@240VAC |
