RM805615 by TE Connectivity | Relays

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	RM805615
Description	POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: AC; Reference Standard: UL; VDE;
Datasheet	RM805615 Datasheet

NAME	DESCRIPTION
Nominal Coil Voltage:	115 V
Maximum Contact AC Power Rating (R Load):	6000VA@400VAC
Maximum DC Contact Current:	25 A
Maximum AC Coil Current:	24 mA
Relay Function:	DPDT
Maximum AC Contact Voltage:	400 V
Dielectric Strength Between Open Contacts:	1.5 kVrms
Contact or Output Supply Type:	AC/DC
Relay Type:	Power/Signal Relay
No. of Terminals:	8
Coil or Input Supply Type:	AC
Relay Form:	2 Form C
Termination Type:	Quick Connect
AC Coil Release Voltage:	34.5 V
Operate Time:	15 ms
Electrical Life:	10000 Cycle(s)
Release Time:	10 ms
Maximum Operating Temperature:	40 °C (104 °F)
Maximum AC Contact Current:	25 A
End Contact Material:	Silver Cadmium Oxide
Maximum AC Coil Voltage:	115 V
Packing Method:	Tray
Coil Resistance:	1.85 kΩ
Sealing:	Dust Proof
Minimum Operating Temperature:	-40 °C (-40 °F)
Weight:	81 g
Mounting Feature:	Panel Mount
Relay Action:	Momentary
Body Width:	35.5 in (901.7 mm)
Dielectric Strength Between Coil & Contacts:	2.5 kVrms
Terminal Length:	0.3937 in (10 mm)
Physical Dimension:	1.516 x 1.398 x 2.894 in (38.5 x 35.5 x 73.5 mm)
AC Coil Operate Voltage:	97.8 V
Additional Features:	Coil Operate Voltage (AC): 92 V, Coil Release Voltage (AC): 34.5 V
Body Height:	2.894 in (73.5 mm)
Body Length/Diameter:	1.516 in (38.5 mm)
Reference Standard:	UL; VDE
Coil Power (mW):	2.8 W
Maximum Contact AC Rating (R Load):	25A@400VAC

Popular Products

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.