Image shown is a representation only.
| Manufacturer | TE Connectivity |
|---|---|
| Manufacturer's Part Number | TT21NGPC1 |
| Description | TOGGLE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): TOGGLE BAT; Contact Function: ON-ON; Solderability: WAVE; |
| Datasheet | TT21NGPC1 Datasheet |
| NAME | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .4 A |
| Center Contact Plating: | GOLD OVER NICKEL |
| Type (Bushing): | UNTHREADED |
| Length (Bushing): | .22 inch |
| Body Color: | BLACK |
| Type (Actuator): | TOGGLE BAT |
| Maximum AC Contact Voltage: | 20 V |
| Solderability: | WAVE |
| Finish (Actuator): | NICKEL |
| Switch Action: | LATCHED |
| Termination Type: | SOLDER |
| Electrical Life: | 60000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Contact Resistance: | 20 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Maximum AC Contact Current: | .4 A |
| End Contact Material: | COPPER ALLOY |
| Angle (Actuator): | 26 deg |
| Maximum DC Contact Voltage: | 20 V |
| DC Maximum Rating R Load (Contact): | .02A@20VDC |
| Dielectric Withstand Volts (V): | 1000 |
| Contact Function: | ON-ON |
| PCB Hole Count: | 6 |
| DC Maximum Power Rating R Load (Contact): | 0.4VA@20VDC |
| Switch Type: | TOGGLE SWITCH |
| AC Maximum Rating R Load (Contact): | .02A@20VAC |
| Sealing: | EPOXY TERMINAL SEALED |
| Minimum Operating Temperature: | -30 Cel |
| Mounting Feature: | PANEL MOUNT |
| Body Width: | 8.13 inch |
| Switch Function: | DPDT |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .13 inch |
| Length (Actuator): | .21 inch |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | THERMOPLASTIC |
| Body Height: | 8.64 mm |
| Body Length/Diameter: | 9.14 mm |
| Washability: | SOLVENT |
| Diameter (Bushing): | .24 inch |
