V23105A5001A201 by TE Connectivity | Relays

Image shown is a representation only.

Manufacturer	TE Connectivity
Manufacturer's Part Number	V23105A5001A201
Description	POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: AC/DC; Reference Standard: CSA; UL;
Datasheet	V23105A5001A201 Datasheet

NAME	DESCRIPTION
Nominal Coil Voltage:	5 V
Maximum DC Contact Current:	3 A
Relay Function:	DPDT
Maximum AC Contact Voltage:	250 V
DC Coil Release Voltage:	250 mV
Dielectric Strength Between Open Contacts:	750 Vrms
Contact or Output Supply Type:	AC/DC
Relay Type:	Power/Signal Relay
No. of Terminals:	8
Coil or Input Supply Type:	AC/DC
Relay Form:	2 Form C
Termination Type:	Solder/Quick Connect
Operate Time:	6 ms
Electrical Life:	100000 Cycle(s)
DC Coil Operate Voltage:	4 V
Release Time:	4 ms
Maximum Operating Temperature:	85 °C (185 °F)
Contact Resistance:	100 mΩ
Insulation Resistance:	1 GΩ
Input Switching Control Type:	Random
Maximum DC Coil Current:	30 mA
Maximum AC Contact Current:	3 A
End Contact Material:	Silver Nickel
Maximum DC Contact Voltage:	220 V
PCB Hole Count:	8
Packing Method:	Box; Tube
Coil Resistance:	167 Ω
Minimum Operating Temperature:	-45 °C (-49 °F)
Weight:	6 g
Mounting Feature:	Panel Mount
Relay Action:	Momentary
Body Width:	10 in (254 mm)
Maximum DC Coil Voltage:	5 V
Dielectric Strength Between Coil & Contacts:	1.05 kVrms
Terminal Length:	0.126 in (3.2 mm)
End Contact Plating:	Gold
Physical Dimension:	0.799 x 0.398 x 0.449 in (20.3 x 10.1 x 11.4 mm)
Body Height:	0.433 in (11 mm)
Body Length/Diameter:	0.795 in (20.2 mm)
Reference Standard:	CSA; UL
Coil Power (mW):	150 mW

Popular Products

Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.