DRV8880PWPR by Texas Instruments | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	DRV8880PWPR
Description	STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Datasheet	DRV8880PWPR Datasheet
In Stock	4,474

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Width (mm):	4.4 mm
Maximum Seated Height:	1.2 mm
Maximum Output Current:	2.5 A
Minimum Supply Voltage (Vsup):	6.5 V
Maximum Supply Current (Isup):	18 mA
Sub-Category:	Motion Control Electronics
Surface Mount:	YES
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	28
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G28
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	125 Cel
Package Code:	HTSSOP
Nominal Supply Voltage (Vsup):	24 V
Moisture Sensitivity Level (MSL):	3
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	TSSOP28,.25
Other IC type:	STEPPER MOTOR CONTROLLER
Length:	9.7 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	AUTOMOTIVE
Maximum Supply Voltage (Vsup):	45 V
Power Supplies (V):	6.5/45

Pricing (USD)

Qty.	Unit Price	Ext. Price
4,474	-	-

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.