DSV14196WM by Texas Instruments | Interface ICs

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	DSV14196WM
Description	LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet	DSV14196WM Datasheet
In Stock	1,697

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Seated Height:	2.65 mm
Minimum Out Swing:	12 V
Maximum High Level Input Current:	.00001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Terminal Finish:	TIN LEAD
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Interface Standard:	EIA-232-E; TIA-232-E; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	7.5 mm
Maximum Output Low Current:	3.2 Amp
Moisture Sensitivity Level (MSL):	2A
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	5
Differential Output:	NO
JESD-609 Code:	e0
Minimum Operating Temperature:	0 Cel
No. of Functions:	3
Qualification:	Not Qualified
Maximum Transmit Delay:	350 ns
Package Equivalence Code:	SOP20,.4
Receiver No. of Bits:	3
Length:	12.8 mm
Maximum Receive Delay:	100 ns
Peak Reflow Temperature (C):	220
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	3.3,+-9/+-12

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,697	-	-

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.