LM60CIM3 by Texas Instruments | Sensors & Transducers

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	LM60CIM3
Description	TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Minimum Output Voltage: .174 V; Package Equivalence Code: TO-236;
Datasheet	LM60CIM3 Datasheet
In Stock	1,926

NAME	DESCRIPTION
Minimum Supply Voltage:	2.7 V
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	.11 mA
Sub-Category:	Other Sensors/Transducers
Terminal Finish:	Tin/Lead (Sn/Pb)
No. of Terminals:	3
Termination Type:	SOLDER
Technology:	BIPOLAR
Maximum Operating Temperature:	125 Cel
Nominal R0:	800 ohm
Minimum Output Voltage:	.174 V
Maximum Accuracy (Cel):	4
Maximum Supply Voltage:	10 V
Maximum Output Voltage:	1.205 V
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.3 inch
Sensors or Transducers Type:	TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT
Temperature Coef (ppm/Cel):	POSITIVE
Package Equivalence Code:	TO-236
Package Shape or Style:	RECTANGULAR
Body Height:	1.015 mm
Body Length/Diameter:	2.92 mm
Power Supplies (V):	3

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,926	-	-

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;