LMT01LPG by Texas Instruments | Sensors & Transducers

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	LMT01LPG
Description	TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 2; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 4 mm; Body Width: 1.52 inch;
Datasheet	LMT01LPG Datasheet
In Stock	47,795

NAME	DESCRIPTION
No. of Bits:	13
Minimum Supply Voltage:	2 V
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	.039 mA
Maximum Accuracy (Cel):	0.5
Nominal Output Current:	143 uA
Maximum Supply Voltage:	5.5 V
Sub-Category:	Other Sensors/Transducers
Terminal Finish:	MATTE TIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-50 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	1.52 inch
Sensors or Transducers Type:	TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL
No. of Terminals:	2
Package Equivalence Code:	SIP2/3,.02,50
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	5.05 mm
Body Length/Diameter:	4 mm
Maximum Operating Temperature:	150 Cel
Power Supplies (V):	2.5/5

Pricing (USD)

Qty.	Unit Price	Ext. Price
47,795	-	-

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;