LP2989ILDX-4.0 by Texas Instruments | Regulators

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	LP2989ILDX-4.0
Description	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 4.5 %; JESD-30 Code: S-PDSO-N8;
Datasheet	LP2989ILDX-4.0 Datasheet
In Stock	523

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Seated Height:	.8 mm
Surface Mount:	YES
Regulator Type:	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Maximum Output Current-1:	.5 A
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
JESD-30 Code:	S-PDSO-N8
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Nominal Output Voltage-1:	4 V
Operating Temperature (TJ-Max):	125 Cel
Package Code:	HVSON
Width:	4 mm
Maximum Dropout Voltage-1:	.65 V
Minimum Input Voltage:	5 V
Maximum Output Voltage-1:	4.14 V
Maximum Input Voltage:	16 V
Minimum Output Voltage-1:	3.82 V
Maximum Voltage Tolerance:	4.5 %
No. of Functions:	1
Operating Temperature (TJ-Min):	-25 Cel
Length:	4 mm
Terminal Pitch:	.8 mm

Pricing (USD)

Qty.	Unit Price	Ext. Price
523	-	-

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.