LT1039CN-10 by Texas Instruments | Interface ICs

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	LT1039CN-10
Description	LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet	LT1039CN-10 Datasheet
In Stock	1,339

NAME	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	5 V
Nominal Supply Voltage:	5 V
Output Characteristics:	3-STATE
Maximum Seated Height:	5.08 mm
Surface Mount:	NO
Maximum Supply Current:	7 mA
No. of Terminals:	18
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDIP-T18
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	70 Cel
Package Code:	DIP
Interface Standard:	EIA-232-D
Interface IC Type:	LINE TRANSCEIVER
Width:	7.62 mm
Nominal Supply Voltage-1:	12 V
Maximum Supply Voltage-1:	15 V
Output Polarity:	INVERTED
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	3
Maximum Supply Voltage:	5.25 V
Differential Output:	NO
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Receiver No. of Bits:	3
Length:	22.48 mm
Maximum Receive Delay:	0 ns
Nominal Negative Supply Voltage:	-12 V
Additional Features:	1 RECEIVER ACTIVE UNDER SHUTDOWN
Terminal Pitch:	2.54 mm
Temperature Grade:	COMMERCIAL

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,339	-	-

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;

SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.

CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;