MPC508AP by Texas Instruments | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	MPC508AP
Description	SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Datasheet	MPC508AP Datasheet
In Stock	5,612

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	NOT APPLICABLE
Width (mm):	7.62 mm
Maximum Seated Height:	5.08 mm
Maximum Switch-on Time:	500 ns
Maximum Supply Current (Isup):	1.5 mA
Sub-Category:	Multiplexer or Switches
Surface Mount:	NO
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	16
Maximum On-state Resistance (Ron):	1500 ohm
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	CMOS
JESD-30 Code:	R-PDIP-T16
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	85 Cel
No. of Channels:	8
Package Code:	DIP
Switching (V):	BREAK-BEFORE-MAKE
Nominal Supply Voltage (Vsup):	15 V
Minimum Input Voltage:	-15 V
Maximum Input Voltage:	15 V
Nominal Off-state Isolation:	68 dB
Maximum Switch-off Time:	500 ns
Normal Position (V):	NO
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	DIP16,.3
Other IC type:	SINGLE-ENDED MULTIPLEXER
Length:	19.305 mm
Output (V):	COMMON OUTPUT
Maximum Signal Current:	.02 A
Peak Reflow Temperature (C):	NOT APPLICABLE
Terminal Pitch:	2.54 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	+-15

Pricing (USD)

Qty.	Unit Price	Ext. Price
5,612	$3.600	$20,203.200

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.