Image shown is a representation only.
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer's Part Number | MSP430F2272IRHAR |
| Description | MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; |
| Datasheet | MSP430F2272IRHAR Datasheet |
| In Stock | 4,940 |
| NAME | DESCRIPTION |
|---|---|
| Minimum Supply Voltage: | 3.3 V |
| Package Body Material: | PLASTIC/EPOXY |
| Integrated Cache: | NO |
| Maximum Time At Peak Reflow Temperature (s): | NOT SPECIFIED |
| Sub-Category: | Microcontrollers |
| Surface Mount: | YES |
| On Chip Data RAM Width: | 8 |
| No. of DMA Channels: | 0 |
| Address Bus Width: | 0 |
| Technology: | BIPOLAR |
| RAM Words: | 1 |
| Maximum Clock Frequency: | 16 MHz |
| Package Shape: | SQUARE |
| Terminal Form: | NO LEAD |
| Package Code: | HVQCCN |
| Moisture Sensitivity Level (MSL): | 3 |
| Bit Size: | 16 |
| DAC Channels: | NO |
| Qualification: | Not Qualified |
| Package Equivalence Code: | LCC40,.24SQ,20 |
| PWM Channels: | YES |
| Additional Features: | ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 4.15 MHZ |
| Connectivity: | "I2C, IRDA, LIN, SPI(2), UART, USCI(2)" |
| Peak Reflow Temperature (C): | 260 |
| ROM Programmability: | FLASH |
| Analog To Digital Convertors: | 12-Ch 10-Bit |
| Terminal Pitch: | .5 mm |
| CPU Family: | MSP430 |
| Nominal Supply Voltage: | 2.2 V |
| Maximum Seated Height: | 1 mm |
| Maximum Supply Current: | .55 mA |
| Terminal Finish: | Nickel/Palladium/Gold (Ni/Pd/Au) |
| ADC Channels: | YES |
| No. of Terminals: | 40 |
| No. of Timers: | 6 |
| No. of Serial I/Os: | 2 |
| DMA Channels: | NO |
| Terminal Position: | QUAD |
| Format: | FIXED POINT |
| Package Style (Meter): | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| No. of I/O Lines: | 32 |
| JESD-30 Code: | S-PQCC-N40 |
| ROM Words: | 33024 |
| Maximum Operating Temperature: | 85 Cel |
| Width: | 6 mm |
| Data EEPROM Size: | 0 |
| Speed: | 16 rpm |
| Peripheral IC Type: | MICROCONTROLLER, RISC |
| Maximum Supply Voltage: | 3.6 V |
| RAM Bytes: | 1024 |
| Low Power Mode: | YES |
| Boundary Scan: | YES |
| External Data Bus Width: | 0 |
| Peripherals: | "BOD, COMPARATOR(8), TIMER(6), WDT" |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -40 Cel |
| Length: | 6 mm |
| On Chip Program ROM Width: | 8 |
| Temperature Grade: | INDUSTRIAL |
| Power Supplies (V): | 2/3.3 |
