OPA132PA by Texas Instruments | Amplifiers

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	OPA132PA
Description	OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet	OPA132PA Datasheet
In Stock	2,688

NAME	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Low-Bias:	Yes
Maximum Seated Height:	0.2 in (5.08 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	18 V
Maximum Bias Current (IIB) @25C:	50 pA
Sub-Category:	Operational Amplifiers
Maximum Supply Current:	4.8 mA
Surface Mount:	No
No. of Terminals:	8
Maximum Input Offset Voltage:	2000 uV
Nominal Unity Gain Bandwidth:	8 MHz
Terminal Position:	Dual
Package Style (Meter):	In Line
JESD-30 Code:	R-PDIP-T8
Low-Offset:	No
Minimum Voltage Gain:	158000
Package Shape:	Rectangular
Terminal Form:	Through-Hole
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	DIP
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	20 V/us
Width:	0.3 in (7.62 mm)
Architecture:	Voltage Feedback
Nominal Common Mode Reject Ratio:	94 dB
Nominal Negative Supply Voltage (Vsup):	-15 V
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	50 pA
No. of Functions:	1
Qualification:	No
Package Equivalence Code:	DIP8,.3
Length:	0.386 in (9.81 mm)
Nominal Supply Voltage / Vsup (V):	15 V
Maximum Negative Supply Voltage Limit:	-18 V
Terminal Pitch:	0.1 in (2.54 mm)
Temperature Grade:	Industrial
Power Supplies (V):	±15 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
2,688	-	-

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;