Image shown is a representation only.
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer's Part Number | OPA2604AP |
| Description | OPERATIONAL AMPLIFIER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; |
| Datasheet | OPA2604AP Datasheet |
| In Stock | 652 |
| NAME | DESCRIPTION |
|---|---|
| Package Body Material: | Plastic/Epoxy |
| Low-Bias: | Yes |
| Maximum Seated Height: | 0.2 in (5.08 mm) |
| Frequency Compensation: | Yes |
| Maximum Supply Voltage Limit: | 25 V |
| Sub-Category: | Operational Amplifiers |
| Maximum Supply Current: | 12 mA |
| Surface Mount: | No |
| Terminal Finish: | Nickel Palladium Gold |
| No. of Terminals: | 8 |
| Minimum Slew Rate: | 15 V/us |
| Maximum Input Offset Voltage: | 5000 uV |
| Nominal Unity Gain Bandwidth: | 20 MHz |
| Terminal Position: | Dual |
| Package Style (Meter): | In Line |
| Technology: | BIPOLAR |
| JESD-30 Code: | R-PDIP-T8 |
| Low-Offset: | No |
| Minimum Voltage Gain: | 10000 |
| Package Shape: | Rectangular |
| Terminal Form: | Through-Hole |
| Maximum Operating Temperature: | 85 °C (185 °F) |
| Package Code: | DIP |
| Amplifier Type: | Operational Amplifier |
| Nominal Slow Rate: | 25 V/us |
| Width: | 0.3 in (7.62 mm) |
| Architecture: | Voltage Feedback |
| Nominal Common Mode Reject Ratio: | 100 dB |
| Packing Method: | Tube |
| Nominal Negative Supply Voltage (Vsup): | -15 V |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -25 °C (-13 °F) |
| Maximum Average Bias Current (IIB): | 100 pA |
| No. of Functions: | 2 |
| Qualification: | No |
| Package Equivalence Code: | DIP8,.3 |
| Length: | 0.386 in (9.81 mm) |
| Nominal Supply Voltage / Vsup (V): | 15 V |
| Maximum Negative Supply Voltage Limit: | -25 V |
| Terminal Pitch: | 0.1 in (2.54 mm) |
| Temperature Grade: | Other |
| Power Supplies (V): | ±4.5/±24 V |
