PLM393BIPWR by Texas Instruments | Amplifiers

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	PLM393BIPWR
Description	COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
Datasheet	PLM393BIPWR Datasheet
In Stock	1,138

NAME	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Output Type:	Open-Collector
Maximum Seated Height:	0.047 in (1.2 mm)
Maximum Supply Voltage Limit:	38 V
Maximum Bias Current (IIB) @25C:	25 nA
Sub-Category:	Comparators
Maximum Supply Current:	800 μA
Surface Mount:	Yes
No. of Terminals:	8
Maximum Input Offset Voltage:	4 mV
Terminal Position:	Dual
Package Style (Meter):	Small Outline, Thin Profile, Shrink Pitch
JESD-30 Code:	R-PDSO-G8
Nominal Response Time:	1 µs
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Maximum Operating Temperature:	125 °C (257 °F)
Package Code:	TSSOP
Amplifier Type:	Comparator
Width:	0.118 in (3 mm)
Packing Method:	Tape And Reel
Nominal Negative Supply Voltage (Vsup):	0 V
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	50 nA
No. of Functions:	2
Package Equivalence Code:	TSSOP8,.25
Length:	0.173 in (4.4 mm)
Nominal Supply Voltage / Vsup (V):	5 V
Maximum Negative Supply Voltage Limit:	0 V
Terminal Pitch:	0.026 in (0.65 mm)
Temperature Grade:	Automotive

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,138	-	-

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;