PTPSM863252RDXR by Texas Instruments | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	PTPSM863252RDXR
Description	SWITCHING REGULATOR; No. of Terminals: 7; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Input Voltage: 3 V;
Datasheet	PTPSM863252RDXR Datasheet
In Stock	688

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Control Mode:	CURRENT-MODE
Width (mm):	3.3 mm
Maximum Seated Height:	2.1 mm
Maximum Output Current:	3 A
Surface Mount:	YES
No. of Outputs:	1
Switcher Config:	BUCK
No. of Terminals:	7
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	HYBRID
JESD-30 Code:	R-PQCC-N7
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Maximum Operating Temperature:	125 Cel
Package Code:	HVQCCN
Minimum Output Voltage:	.6 V
Control Technique:	PULSE WIDTH MODULATION
Maximum Switching Frequency:	2000 kHz
Minimum Input Voltage:	3 V
Maximum Input Voltage:	16 V
Maximum Output Voltage:	10 V
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	LCC7,.13x.16(UNSPEC)
Nominal Input Voltage:	12 V
Other IC type:	SWITCHING REGULATOR
Length:	4 mm

Pricing (USD)

Qty.	Unit Price	Ext. Price
688	-	-

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;