SE70CP160AJDH by Texas Instruments | Peripheral ICs

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	SE70CP160AJDH
Description	MICROCONTROLLER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet	SE70CP160AJDH Datasheet
In Stock	2,409

NAME	DESCRIPTION
Minimum Supply Voltage:	2.5 V
Package Body Material:	CERAMIC, METAL-SEALED COFIRED
Integrated Cache:	NO
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Sub-Category:	Microcontrollers
Surface Mount:	NO
On Chip Data RAM Width:	8
No. of DMA Channels:	0
Address Bus Width:	16
Technology:	CMOS
RAM Words:	128
Maximum Clock Frequency:	6 MHz
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Package Code:	DIP
No. of External Interrupts:	2
Bit Size:	8
DAC Channels:	NO
Qualification:	Not Qualified
Package Equivalence Code:	DIP40,.6
PWM Channels:	NO
Additional Features:	PIGGYBACK EPROM
Peak Reflow Temperature (C):	NOT SPECIFIED
ROM Programmability:	EPROM
Terminal Pitch:	2.54 mm
CPU Family:	TMS7000
Nominal Supply Voltage:	5 V
Maximum Supply Current:	14.4 mA
ADC Channels:	NO
No. of Terminals:	40
No. of Timers:	1
No. of Serial I/Os:	0
DMA Channels:	NO
Terminal Position:	DUAL
Format:	FIXED POINT
Package Style (Meter):	IN-LINE
No. of I/O Lines:	32
JESD-30 Code:	R-CDIP-T40
Maximum Operating Temperature:	55 Cel
Speed:	3.25 rpm
Peripheral IC Type:	MICROCONTROLLER
Maximum Supply Voltage:	6 V
RAM Bytes:	128
Low Power Mode:	YES
Boundary Scan:	NO
External Data Bus Width:	8
Minimum Operating Temperature:	0 Cel
Temperature Grade:	COMMERCIAL
Power Supplies (V):	3/5

Pricing (USD)

Qty.	Unit Price	Ext. Price
2,409	-	-

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;