SN74LVC257ARGYR by Texas Instruments | Logic ICs

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	SN74LVC257ARGYR
Description	MULTIPLEXER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: RECTANGULAR;
Datasheet	SN74LVC257ARGYR Datasheet
In Stock	1,106

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	3-STATE
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1 mm
No. of Inputs:	2
Minimum Supply Voltage (Vsup):	1.65 V
Sub-Category:	Multiplexer/Demultiplexers
Maximum Power Supply Current (ICC):	.01 mA
Surface Mount:	YES
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Outputs:	1
No. of Terminals:	16
Maximum I (ol):	24 Amp
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	CMOS
JESD-30 Code:	R-PQCC-N16
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Propagation Delay At Nominal Supply:	4.6 ns
Width:	3.5 mm
Moisture Sensitivity Level (MSL):	2
No. of Bits:	2
Other Names:	2156-SN74LVC257ARGYR TEXTISSN74LVC257ARGYR -296-13969-1-ND -SN74LVC257ARGYR-NDR -296-13969-1 296-13969-6-NDR 296-13969-2-NDR SN74LVC257ARGYRG4 SN74LVC257ARGYRG4-ND -296-13969-1-NDR -SN74LVC257ARGYRG4-NDR 296-13969-6 296-13969-1-NDR -SN74LVC257ARGYRG4 296-13969-1 296-13969-2
Output Polarity:	TRUE
Packing Method:	TR
Logic IC Type:	MULTIPLEXER
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	4
Qualification:	Not Qualified
Package Equivalence Code:	LCC16/20,.14X.16,20
Length:	4 mm
Propagation Delay (tpd):	13.5 ns
Nominal Supply Voltage / Vsup (V):	3.3
Family:	LVC/LCX/Z
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	3.6 V
Power Supplies (V):	3.3

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,106	$0.150	$165.900

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.