SN74SSTVF16859SRG3 by Texas Instruments | Logic ICs

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	SN74SSTVF16859SRG3
Description	D FLIP-FLOP; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet	SN74SSTVF16859SRG3 Datasheet
In Stock	295

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Seated Height:	1 mm
Trigger Type:	POSITIVE EDGE
Minimum Supply Voltage (Vsup):	2.5 V
Sub-Category:	Other Logic ICs
Surface Mount:	YES
Terminal Finish:	TIN LEAD
No. of Terminals:	56
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	CMOS
JESD-30 Code:	S-PQCC-N56
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Minimum fmax:	500 MHz
Maximum Operating Temperature:	70 Cel
Package Code:	HVQCCN
Width:	8 mm
Moisture Sensitivity Level (MSL):	3
No. of Bits:	13
Output Polarity:	TRUE
Logic IC Type:	D FLIP-FLOP
JESD-609 Code:	e0
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	LCC56,.31SQ,20
Length:	8 mm
Propagation Delay (tpd):	2.5 ns
Nominal Supply Voltage / Vsup (V):	2.6
Family:	SSTV
Terminal Pitch:	.5 mm
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	2.7 V
Power Supplies (V):	2.5

Pricing (USD)

Qty.	Unit Price	Ext. Price
295	-	-

Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;

RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;