Image shown is a representation only.
| Manufacturer | Texas Instruments |
|---|---|
| Manufacturer's Part Number | SN75ALS1711N |
| Description | LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; |
| Datasheet | SN75ALS1711N Datasheet |
| In Stock | 1,954 |
| NAME | DESCRIPTION |
|---|---|
| Minimum Supply Voltage: | 4.75 V |
| Package Body Material: | PLASTIC/EPOXY |
| Nominal Supply Voltage: | 5 V |
| Output Characteristics: | 3-STATE |
| Maximum Seated Height: | 5.08 mm |
| Minimum Out Swing: | 1.5 V |
| Maximum High Level Input Current: | .00002 Amp |
| Sub-Category: | Line Driver or Receivers |
| Surface Mount: | NO |
| Maximum Supply Current: | 72 mA |
| Terminal Finish: | NICKEL PALLADIUM GOLD |
| No. of Terminals: | 20 |
| Terminal Position: | DUAL |
| Package Style (Meter): | IN-LINE |
| Technology: | BIPOLAR |
| JESD-30 Code: | R-PDIP-T20 |
| Package Shape: | RECTANGULAR |
| Terminal Form: | THROUGH-HOLE |
| Maximum Operating Temperature: | 70 Cel |
| Package Code: | DIP |
| Interface Standard: | X3.131; EIA-485; SCSI |
| Interface IC Type: | LINE TRANSCEIVER |
| Width: | 7.62 mm |
| Maximum Output Low Current: | 60 Amp |
| Output Polarity: | COMPLEMENTARY |
| Input Characteristics: | DIFFERENTIAL SCHMITT TRIGGER |
| Driver No. of Bits: | 3 |
| Maximum Supply Voltage: | 5.25 V |
| Differential Output: | YES |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | 0 Cel |
| No. of Functions: | 1 |
| Qualification: | Not Qualified |
| Maximum Transmit Delay: | 22 ns |
| Package Equivalence Code: | DIP20,.3 |
| Receiver No. of Bits: | 3 |
| Length: | 24.325 mm |
| Maximum Receive Delay: | 37 ns |
| Additional Features: | TRISTATABLE RECEIVERS; 3 RECEIVERS ACTIVE UNDER SHUTDOWN; ADDITIONAL COMMON ENABLE INPUT |
| Terminal Pitch: | 2.54 mm |
| Temperature Grade: | COMMERCIAL |
| Power Supplies (V): | 5 |
