TDA3MDDBABFRQ1 by Texas Instruments | General Purpose ICs

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	TDA3MDDBABFRQ1
Description	CONSUMER CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: BALL; No. of Terminals: 367; Package Code: FBGA; Package Shape: SQUARE;
Datasheet	TDA3MDDBABFRQ1 Datasheet
In Stock	1,160

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	2.82 mm
Minimum Supply Voltage (Vsup):	1.02 V
Surface Mount:	YES
Terminal Finish:	TIN SILVER COPPER
No. of Terminals:	367
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, FINE PITCH
Screening Level:	AEC-Q100
JESD-30 Code:	S-PBGA-B367
Package Shape:	SQUARE
Terminal Form:	BALL
Maximum Operating Temperature:	125 Cel
Package Code:	FBGA
General IC Type:	CONSUMER CIRCUIT
Width:	15 mm
Moisture Sensitivity Level (MSL):	3
JESD-609 Code:	e1
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Length:	15 mm
Peak Reflow Temperature (C):	250
Terminal Pitch:	.65 mm
Temperature Grade:	AUTOMOTIVE
Maximum Supply Voltage (Vsup):	1.11 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
1,160	-	-

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.