THS4511RGTRG4 by Texas Instruments | Amplifiers

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	THS4511RGTRG4
Description	OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: VQCCN; Package Shape: SQUARE;
Datasheet	THS4511RGTRG4 Datasheet
In Stock	4,285

NAME	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Seated Height:	0.039 in (1 mm)
Maximum Supply Voltage Limit:	5.5 V
Sub-Category:	Operational Amplifiers
Maximum Supply Current:	43.5 mA
Surface Mount:	Yes
No. of Terminals:	16
Maximum Input Offset Voltage:	5000 uV
Nominal Unity Gain Bandwidth:	2000 MHz
Terminal Position:	Quad
Package Style (Meter):	Chip Carrier, Very Thin Profile
JESD-30 Code:	S-PQCC-N16
Package Shape:	Square
Terminal Form:	No Lead
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	VQCCN
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	110 V/us
Width:	0.118 in (3 mm)
Nominal Common Mode Reject Ratio:	90 dB
Nominal Negative Supply Voltage (Vsup):	0 V
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	18.5 uA
No. of Functions:	1
Qualification:	No
Package Equivalence Code:	LCC16,.12SQ,20
Length:	0.118 in (3 mm)
Nominal Supply Voltage / Vsup (V):	5 V
Maximum Negative Supply Voltage Limit:	0 V
Terminal Pitch:	0.02 in (0.5 mm)
Temperature Grade:	Industrial
Power Supplies (V):	5 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
4,285	-	-

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.