TLC2201BMDR by Texas Instruments | Amplifiers

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	TLC2201BMDR
Description	OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet	TLC2201BMDR Datasheet
In Stock	3,151

NAME	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Low-Bias:	Yes
Maximum Seated Height:	0.069 in (1.75 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	8 V
Maximum Bias Current (IIB) @25C:	500 pA
Sub-Category:	Operational Amplifiers
Maximum Supply Current:	1.5 mA
Surface Mount:	Yes
No. of Terminals:	8
Minimum Slew Rate:	1.3 V/us
Maximum Input Offset Voltage:	400 uV
Nominal Unity Gain Bandwidth:	1.9 MHz
Terminal Position:	Dual
Package Style (Meter):	Small Outline
Technology:	CMOS
JESD-30 Code:	R-PDSO-G8
Low-Offset:	Yes
Minimum Voltage Gain:	45000
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Maximum Operating Temperature:	125 °C (257 °F)
Package Code:	SOP
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	2.7 V/us
Width:	0.154 in (3.9 mm)
Architecture:	Voltage Feedback
Nominal Common Mode Reject Ratio:	115 dB
Packing Method:	Tape And Reel
Nominal Negative Supply Voltage (Vsup):	-5 V
Minimum Operating Temperature:	-55 °C (-67 °F)
Maximum Average Bias Current (IIB):	500 pA
No. of Functions:	1
Qualification:	No
Minimum Common Mode Reject Ratio:	85 dB
Package Equivalence Code:	SOP8,.25
Length:	0.193 in (4.9 mm)
Nominal Supply Voltage / Vsup (V):	5 V
Maximum Negative Supply Voltage Limit:	-8 V
Terminal Pitch:	0.05 in (1.27 mm)
Temperature Grade:	Military
Power Supplies (V):	±5 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
3,151	-	-

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;

FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;