TMUX7412FRRPR by Texas Instruments | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	TMUX7412FRRPR
Description	SPST; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Switching (V): BREAK-BEFORE-MAKE;
Datasheet	TMUX7412FRRPR Datasheet
In Stock	4,947

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Minimum Negative Supply Voltage (Vsup):	-5 V
Width (mm):	4 mm
Maximum Seated Height:	.8 mm
Minimum Supply Voltage (Vsup):	5 V
Maximum Switch-on Time:	710 ns
Maximum Supply Current (Isup):	1 mA
Nominal On-state Resistance Match:	.06 ohm
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	16
Maximum On-state Resistance (Ron):	17 ohm
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	CMOS
JESD-30 Code:	S-PQCC-N16
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	125 Cel
No. of Channels:	4
Package Code:	HVQCCN
Switching (V):	BREAK-BEFORE-MAKE
Nominal Bandwidth:	500 kHz
Nominal Supply Voltage (Vsup):	15 V
Moisture Sensitivity Level (MSL):	2
Minimum Input Voltage:	0 V
Maximum Input Voltage:	22 V
Nominal Off-state Isolation:	60 dB
Maximum Switch-off Time:	150 ns
Normal Position (V):	NC
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Maximum Negative Supply Voltage (Vsup):	-22 V
No. of Functions:	1
Package Equivalence Code:	LCC16,.16SQ,25
Other IC type:	SPST
Length:	4 mm
Output (V):	SEPARATE OUTPUT
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Maximum Supply Voltage (Vsup):	22 V

Pricing (USD)

Qty.	Unit Price	Ext. Price
4,947	$4.379	$21,662.913

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.