TS3V712ELRTGR by Texas Instruments | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	TS3V712ELRTGR
Description	VIDEO MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
Datasheet	TS3V712ELRTGR Datasheet
In Stock	566

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Width (mm):	3 mm
Maximum Seated Height:	.8 mm
Minimum Supply Voltage (Vsup):	3 V
Maximum Switch-on Time:	13 ns
Maximum Supply Current (Isup):	.5 mA
Sub-Category:	Multiplexer or Switches
Nominal On-state Resistance Match:	1 ohm
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	32
Maximum On-state Resistance (Ron):	6 ohm
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
JESD-30 Code:	R-PQCC-N32
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
No. of Channels:	7
Package Code:	HVQCCN
Switching (V):	BREAK-BEFORE-MAKE
Nominal Bandwidth:	1300 kHz
Nominal Supply Voltage (Vsup):	3.3 V
Moisture Sensitivity Level (MSL):	3
Minimum Input Voltage:	0 V
Maximum Input Voltage:	5.5 V
Nominal Off-state Isolation:	38 dB
Maximum Switch-off Time:	13 ns
Normal Position (V):	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	LCC32,.12X.24,16
Other IC type:	VIDEO MULTIPLEXER
Length:	6 mm
Output (V):	SEPARATE OUTPUT
Peak Reflow Temperature (C):	260
Terminal Pitch:	.4 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	5.5 V
Power Supplies (V):	3.3,5

Pricing (USD)

Qty.	Unit Price	Ext. Price
566	$2.300	$1,301.800

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.