UCC3954PW by Texas Instruments | Other Function Semiconductors

Image shown is a representation only.

Manufacturer	Texas Instruments
Manufacturer's Part Number	UCC3954PW
Description	BATTERY CHARGE CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Datasheet	UCC3954PW Datasheet
In Stock	2,231

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Control Mode:	VOLTAGE-MODE
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Output Current:	.2 A
Sub-Category:	Switching Regulator or Controllers
Surface Mount:	YES
Switcher Config:	BUCK-BOOST
No. of Terminals:	14
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G14
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Control Technique:	PULSE WIDTH MODULATION
Maximum Switching Frequency:	200 kHz
Minimum Input Voltage:	2.5 V
Maximum Input Voltage:	4.2 V
Minimum Operating Temperature:	-20 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	TSSOP20,.25
Nominal Input Voltage:	3.5 V
Other IC type:	BATTERY CHARGE CONTROLLER
Peak Reflow Temperature (C):	NOT SPECIFIED
Terminal Pitch:	.635 mm
Temperature Grade:	COMMERCIAL

Pricing (USD)

Qty.	Unit Price	Ext. Price
2,231	-	-

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.