SF3D42C by Toshiba | Triggering Devices

Image shown is a representation only.

Manufacturer	Toshiba
Manufacturer's Part Number	SF3D42C
Description	SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; No. of Terminals: 3;
Datasheet	SF3D42C Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Repetitive Peak Off-state Leakage Current:	10 uA
Trigger Device Type:	SCR
Configuration:	SINGLE
Maximum RMS On-state Current:	4.7 A
Repetitive Peak Reverse Voltage:	10 V
Surface Mount:	NO
Minimum Operating Temperature:	-40 Cel
Maximum DC Gate Trigger Voltage:	.8 V
Maximum DC Gate Trigger Current:	.1 mA
No. of Terminals:	3
Qualification:	Not Qualified
Terminal Position:	SINGLE
Package Style (Meter):	FLANGE MOUNT
JESD-30 Code:	R-PSFM-T3
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	125 Cel
Repetitive Peak Off-state Voltage:	200 V

Popular Products

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;