TC58DVM82A1XBJ1 by Toshiba | Memory ICs

Image shown is a representation only.

Manufacturer	Toshiba
Manufacturer's Part Number	TC58DVM82A1XBJ1
Description	EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 56; Package Code: TFBGA; Package Shape: RECTANGULAR; Qualification: Not Qualified;
Datasheet	TC58DVM82A1XBJ1 Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Standby Current:	.00005 Amp
Organization:	32MX8
Maximum Seated Height:	1.2 mm
Programming Voltage (V):	3
Minimum Supply Voltage (Vsup):	2.7 V
Sub-Category:	Flash Memories
Surface Mount:	YES
Maximum Supply Current:	30 mA
Command User Interface:	YES
Terminal Finish:	Tin/Lead (Sn/Pb)
No. of Terminals:	56
No. of Words:	33554432 words
Terminal Position:	BOTTOM
Package Style (Meter):	GRID ARRAY, THIN PROFILE, FINE PITCH
Technology:	CMOS
JESD-30 Code:	R-PBGA-B56
No. of Sectors/Size:	2K
Package Shape:	RECTANGULAR
Terminal Form:	BALL
Operating Mode:	ASYNCHRONOUS
Maximum Operating Temperature:	85 Cel
Package Code:	TFBGA
Width:	7 mm
Memory Density:	268435456 bit
Sector Size (Words):	16K
Toggle Bit:	NO
Memory IC Type:	EEPROM
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
Memory Width:	8
Page Size (words):	512
No. of Functions:	1
Type:	NAND TYPE
Qualification:	Not Qualified
Package Equivalence Code:	BGA56,8X12,32
Length:	10 mm
Maximum Access Time:	35 ns
No. of Words Code:	32M
Nominal Supply Voltage / Vsup (V):	3.3
Ready or Busy:	YES
Parallel or Serial:	SERIAL
Terminal Pitch:	.8 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	3.6 V
Data Polling:	NO
Power Supplies (V):	3.3

Popular Products

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;