Western Digital Corporation - SLFLD25-1GBHI

SLFLD25-1GBHI by Western Digital Corporation

Image shown is a representation only.

Manufacturer	Western Digital Corporation
Manufacturer's Part Number	SLFLD25-1GBHI
Description	Flash Drives; Brand Name: HGST; Product Type: Flash Drive; Storage Capacity: 1 GB; Data Transfer Rate: 8 MB/s, 3 MB/s, 1.5 MB/s; Height: 0.78 ";

SLFLD25-1GBHI Technical Details

NAME	DESCRIPTION
Data Transfer Rate:	8 MB/s, 3 MB/s, 1.5 MB/s
Product Name:	1 GB 2.5" IDE Flash Drive
Input Voltage:	5 V DC
Limited Warranty:	2 Year
Brand Name:	HGST
Additional Information:	FEATURES: Standard IDE Drive Form Factor of 2.5-Inch Standard IDE connector and Interface Configures to Master or Slave IDE device Replaces IDE hard drive for applications where tough environments prohibit use of traditional rotating media Solid-State (no moving parts) High Shock and Vibration Limits 512 Byte Sector and ECC Defect Management Compatible to IDE Hard Disk Drives No "Spin" Noise Compared to Traditional Rotating Media Start Up Times (Reset to Ready): 100 ms Start Up Times (Sleep to Idle): 2 ms Controller Overhead (Command to DRQ): 2 ms Data Transfer Cycle End to Ready (Sector Write): 2 ms Data Write/Erase Endurance: 300,000 cycles Shock: 500G, 3 cycles/Axis X, Y, Z/Unit Vibration (Logarithmic Digital Sine): freq=100-2000Hz, 20G, 3 sweeps/Axis X, Y, Z/Unit
Marketing Information:	The SimpleTech SLFLD25-1GHI are solid-state flash IDE drives with capacity of 1GB and with a standard 2.5-inch form factor. The IDE drive consists of an IDE controller and an array of flash memory devices. The IDE drive supports the standard ATA register and command set.
Length:	3.94 "
Product Type:	Flash Drive
Host Interface:	IDE
Height:	0.78 "
Storage Capacity:	1 GB
Width:	2.75 "

Popular Products

LM317T

Inchange Semiconductor

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

LL4148

Rectron

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

LL4148

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

LM7805CT

Integrated Circuit Technology

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

FDC5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;

2N2222A

Baneasa S A

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;