W29N08GVSIAA by Winbond Electronics | Memory ICs

Image shown is a representation only.

Manufacturer	Winbond Electronics
Manufacturer's Part Number	W29N08GVSIAA
Description	FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Maximum Supply Voltage (Vsup): 3.6 V;
Datasheet	W29N08GVSIAA Datasheet

NAME	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Standby Current:	.0002 Amp
Organization:	1GX8
Output Characteristics:	3-STATE
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.2 mm
Programming Voltage (V):	3
Minimum Supply Voltage (Vsup):	2.7 V
Surface Mount:	YES
Maximum Supply Current:	350 mA
Command User Interface:	NO
No. of Terminals:	48
No. of Words:	1073741824 words
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G48
No. of Sectors/Size:	8K
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Operating Mode:	ASYNCHRONOUS
Maximum Operating Temperature:	85 Cel
Endurance:	100000 Write/Erase Cycles
Package Code:	TSOP1
Width:	12 mm
Memory Density:	8589934592 bit
Sector Size (Words):	128K
Toggle Bit:	YES
Memory IC Type:	FLASH
Minimum Operating Temperature:	-40 Cel
Memory Width:	8
Page Size (words):	2K
No. of Functions:	1
Type:	SLC NAND TYPE
Package Equivalence Code:	tsop48,.787,20
Alternate Memory Width:	1
Length:	18.4 mm
No. of Words Code:	1G
Nominal Supply Voltage / Vsup (V):	3
Minimum Data Retention Time:	10
Ready or Busy:	YES
Peak Reflow Temperature (C):	NOT SPECIFIED
Parallel or Serial:	PARALLEL
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	3.6 V
Data Polling:	NO

Popular Products

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.